audioint4 program listing

audioint4 program listing

Postby mcanulty » Thu May 20, 2010 11:20 pm

this is no longer accurate, see final post

; current programs and their memory locations
;
; code switch memory address/data bits/channels - function
; ----- ----------- --------------------------------------------
; $0200 = position 07 = 18b/16b/stereo - delay - pot controlled (3ms - 3s)
; $0400 = position 06 = 16b/16b/stereo - delay - pot controlled (0s - .7s)
; $0600 = position 05 = 16b/16b/mono - vco with vca
; $0800 = position 04 = 16b/16b/stereo - upsweep - pot controlled
; $0a00 = position 03 = 16b/16b/stereo - reverser
; $0c00 = position 02 = 16b/16b/stereo - up/down sweep
; $0e00 = position 01 = 16b/16b/stereo - delay - rotary encoder controlled
; $1000 = position 00 = 16b/16b/mono - reverb
; $1200 = position 15 = 16b/16b/mono - fullwave rectifier
; $1400 = position 14 = 16b/16b/mono - gated reverser
; $1600 = position 13 = 16b/16b/mono - envelope stripper as vca on rampwave
; $1800 = position 12 = 16b/16b/mono - ring modulator
; $1a00 = position 11 = 16b/16b/mono - sampler - pot controlled playback speed
; $1c00 = position 10 = 16b/16b/mono - 16 voice chorus
; $1e00 = position 09 = 16b/16b/mono - flanger
; $2000 = position 08 = 16b/16b/mono - sampler - rotary encoder controlled playback speed
mcanulty
Site Admin
 
Posts: 63
Joined: Thu May 20, 2010 10:46 pm

Re: audioint4 program listing

Postby guest » Fri May 21, 2010 12:02 am

those listings are probably wrong
the ones to pay attention to
are the ones next to the .org statements
at the bottom of the main file
i didnt update the comment listings
guest
Site Admin
 
Posts: 449
Joined: Thu May 20, 2010 11:58 pm

Re: audioint4 program listing

Postby guest » Wed Jun 09, 2010 11:52 pm

this all brings up a good question
what 16 programs should the microdec come preloaded with
we should probably nail this down soon
so we can get those polished for release
guest
Site Admin
 
Posts: 449
Joined: Thu May 20, 2010 11:58 pm

Re: audioint4 program listing

Postby mcanulty » Mon Aug 23, 2010 2:11 am

mcanulty
Site Admin
 
Posts: 63
Joined: Thu May 20, 2010 10:46 pm

Re: audioint4 program listing

Postby waterman » Fri Sep 17, 2010 11:29 am

I am assembling the program & have a couple of lookup tables.(I can't find them, anyway)..

sinewave-16b-512s.asm
tone_chart-16b.asm

Are these posted?

Thanks
waterman
 
Posts: 5
Joined: Thu Sep 16, 2010 4:26 pm

Re: audioint4 program listing

Postby guest » Fri Sep 17, 2010 1:34 pm

thanks for the catch
ill get them up on the wiki shortly
they will be posted with the stock functions

there is also the full bundle with them in it
linked off the documentation section of the wiki
http://wiki.openmusiclabs.com/wiki/MICr ... rodec1.zip
guest
Site Admin
 
Posts: 449
Joined: Thu May 20, 2010 11:58 pm

Re: audioint4 program listing

Postby fairyanna » Mon Jan 05, 2015 1:01 am

I think I would be interested in this. Also, been meaning to ask,
I have the modern device's USB breakout board, with the FT232R chip,
will that work for programming the microdec?
Get free demos for pmp exam exam and mcts exam with ccna practice exam guaranteed success. Our best quality Microsoft Exams prepares you well before appearing in the final exams of www.bc.edu and mcts with Quincy University
fairyanna
 
Posts: 1
Joined: Mon Jan 05, 2015 12:58 am

Re: audioint4 program listing

Postby guest » Mon Jan 05, 2015 12:15 pm

that usb to serial converter should work for programming a microdec that has the arduino bootloader on it (all the ones sold from oml had it).
guest
Site Admin
 
Posts: 449
Joined: Thu May 20, 2010 11:58 pm


Return to Software

Who is online

Users browsing this forum: No registered users and 1 guest


cron