It needs a back ...

It needs a back ...

Postby brennivin » Mon Jul 22, 2013 8:43 am

I'm hoping that someone out there in the DIY-verse knows someone with a 3D printer, who can produce a back for the Alpha that looks like half of a standard cassette, but actually fits the Alpha and can use the available holes to attach.

Anyone?

Before I get too experimental with a Dremel?
brennivin
 
Posts: 4
Joined: Thu Jul 18, 2013 7:24 pm

Re: It needs a back ...

Postby guest » Mon Jul 22, 2013 11:35 am

i used half of a cassette tape on mine. it took a bit of cutting to clear out for the switch and headphones, but worked ok.
guest
Site Admin
 
Posts: 449
Joined: Thu May 20, 2010 11:58 pm

Re: It needs a back ...

Postby brennivin » Tue Jul 23, 2013 8:25 pm

That's what I've got taped on right now. Works OK, but it needs more depth among other things. I'm thinking I'll put the two halves back together, and cut out most of one side, so it'll be full depth around the edges. If I can find longer screws with wider heads to screw it down to the case that'd be a bonus.
brennivin
 
Posts: 4
Joined: Thu Jul 18, 2013 7:24 pm


Return to Mixtape Alpha

Who is online

Users browsing this forum: No registered users and 1 guest


cron